Month: February 2026

Withernsea, Louth, Burnley, Bransholme, HOSM, Deeping St James…

Sunday morning found us over to Withernsea to check out an issue Laura was experiencing with ‘Princess’, her MGF. We carried out various checks and couldn’t find anything amiss. Hopefully she will behave this week when Laura starts her new job! We made the most of the fab weather and popped down to Spurn Point while we were there.

Our first call of the week on Monday morning was down in Louth, where it was good to see Stu again for the cambelt service on his 2006 TF 135 in Ignition Blue (JRJ).

Full cambelt service carried out on this fairly low mileage good example known to Stu as ‘Royston’. Thanks to Stu for the brews and bacon butties. We should have been heading on to Bilsby for hydragas pump up that was booked in, but that didn’t happen in the end.

With a couple of unavoidable cancellations at the workshop on Tuesday we offered the date to Walter who was having some issues with his Mk I 2001 MGF 1.6 in Solar Red (CMU). So we made our way over to Burnley to see what was occurring. He thought the head gasket was on its way out again, and it had a misfire. On code reading we found various errors. Lambda sensor changed and the coil packs replaced with the originals that were on it. The head gasket was fine. But found after a chat with Walter that the cambelt service was due. We replaced this along with new spark plugs, new fuel filter and new coolant cap.

Great to meet Walter and chat while we worked, thanks to him for the brews and biscuits.

As we weren’t too far away from our pals Maggy and Phil we thought we’d pay them a surprise visit, it was really great to meet their newest family member too, the beautiful and very jolly Jasper! Sorry didn’t get a pic. 🐶

Wednesday found us, not too far away, in Bransholme where it was great to see Tony again. His 1999 MGF 120 mpi in Tahiti Blue (JRJ) was due for its cambelt service, full service duly carried out for him. Thanks to Tony for the brews and biscuits, good to have a catch up with him.

Thursday morning took us over to the workshop to get the van restocked and loaded up with the big old bearing press. Plus we went over to the MOT station to finally get a load of MOTs booked in that have been on my ‘to do’ list. We did have a second day planned to work on one of the cars that was unavoidably postponed, so we weren’t really being lazy!

That brings us to Friday again, and we headed off bright and early to head down to Deeping St James. We needed to call in to Rimmer Bros on the way and were there for them opening to pick up another Lambda sensor for today’s job, we’d used the one for today unexpectedly earlier in the week. We usually keep quite a few on stock, but they’ve been low on their stock recently and only had one in. Yes there are cheapo ones available on eBay, but there isn’t any point in fitting those, we’d only be having to make a return visit a couple of weeks later.

Graeme’s 2002 TF 160 in Tahiti Blue (JRJ) had received a few advisories on the last MOT.

We replaced both front wheel bearings, the rear suspension arm, adjusted the handbrake and replaced the Lambda sensor. The exhaust back-box we found had a bit of a blow, so after a chat about new exhaust options he’s going to order himself a Mike Satur Daytona with the quads tail finishers, which will suit the car nicely!

Great to see Graeme again, thanks to him for the brews and biscuits, we look forward to seeing him again next time.

So that’s us done for the week, back home now after a slow run back up. There was an issue on the Humber Bridge, just hope that everyone concerned are okay. We’ve a bit of a busy weekend ahead with one thing and another. Hope everyone has a great one wherever you may be! – https://ift.tt/jkheuFQ

Cuddington, Greasby, Bingley, Holme on Spalding Moor…

An early start on Monday morning to head over to Cuddington, near Crewe, where it was great to see Steve as always for some work on his fab 2001 Trophy (in FAR).

Steve had noticed all four brake hoses were looking a bit aged so wanted them replacing with some Goodridge stainless ones. Brake fluid change, oil change and new alternator belt also replaced. He’d noticed some fluid underneath the car and thought it was a coolant leak, but on our inspection found it to be coming from the clutch slave-cylinder, so we replaced it with a new one along with new clevis pin as his was a tad notchy.

Thanks to Steve for all the cuppas, bacon butties and chocolate biscuits, much appreciated on a cold wet day.

Following an overnight stay in Chester, we headed over to Greasby, on Tuesday morning where it was great to see Simon again. His 1998 MGF 120 was in need of a minor service, and his fairly new acquisition of a 2004 ZT 120 was also due a minor service. A lovely example with very low mileage.

Thanks to Simon for the cuppas and biscuits, good to have a chat with him as always, then we were on our way home.

We headed over to Bingley first thing on Wednesday morning, where we met Malcolm who owns Gasoline Alley and has had many MGs pass through the doors. However, this particular one had got him stumped, as well as another local garage who had tried, so asked if we would be able to help.

On doing a cambelt service the engine mount bolts wouldn’t move, which is a fairly common occurrence. But we managed to get round it with our ‘Plan B’. Cambelt, water pump, tensioner, alternator belt and air filter all replaced. It was good to meet Malcom and really interesting to hear about his long history in the motor industry.

Thursday morning found us back in the workshop for work on John’s 2004 TF 135 (in HFF) that he’d left with us the day before. He’d dropped in to see us on spec a few weeks ago whilst visiting relatives in the area.

Full cambelt service carried out, underfloor coolant pipes replaced with stainless, and a Mike Satur Daytona exhaust back-box fitted. All done and ready for John to collect in the afternoon, when he and his wife came back over from Keighley. Originally booked in alongside another job in the workshop that morning, which was canceled in the end. Saying that it would have been too much work to do in the rain on his drive and John was just happy to get everything sorted so soon. It’s a very good example, with a tasteful interior.

And that brings us to the end of week, and we booked the day off as it’s my lovely dad’s 85th birthday today so we’re taking him out for dinner at his favourite place.

Have a great weekend everyone, finally it looks like we’re heading for some dry weather and warmer temperatures. Good job as I think we will all be either growing webbed feet or gaining some gills! 🦆 – https://ift.tt/czvdg2D

The plan originally for this week was to go away for a few days in the warmth with it having been the occasion of Jon’s birthday on Sunday, but we had second thoughts on that as a bit too busy. I know, bring out the baby violin. He had the day off and went down to Stoneleigh instead, not very exciting in the end.

Ben had got in touch with us at the end of November to see if we could come over to Ingleton and sort a few things on a 2002 TF 160 (in xpower grey – LEF) that he’d just recently purchased, which didn’t have any paperwork. With it being a fairly large list we blocked out a couple of days to complete the work.

We then had an enquiry from Ian in Keighley, who also had a recent purchase of a 2004 TF 135 (in Trophy Blue – JEV), that didn’t have a great deal of history.

Tuesday morning found us up well before dawn to head up to Keighley, only for the turbo on the van to let go a couple of miles along the motorway. We limped it steadily back home and set into place a contingency plan, which involved decanting all the gear and parts necessary for the jobs into the back of the X5, in the dark! A quick message to Ian to let him know we’d be later than planned we still arrived at 10 o’clock, not bad going.

The only thing we couldn’t fit in was the gazebo, and seeing the forecast another message to Ian, who fortunately had one, which he kindly deployed in readiness for our arrival.

The job went really well with no awkward bolts and we were on our way by midday. Thanks to Ian for the brew and the shelter!

We then made our way over to Settle to stop for a cuppa and cake en route as we were too early to check in to the digs in Ingleton.

Wednesday morning found us less than a mile down the road to meet Ben. He has a company called Van Magik and a nice big workshop, complete with heater!

Ben hadn’t experienced any issues with the head gasket, but after doing a bit of research he wanted to have it done for peace of mind as he’s got a big tour of Scotland planned later in the year. When we removed the head found that the gasket that was on it was a Payen elastomer type, and that also been fitted with a saver-shim, along with a load of sealant.

Cambelt service carried out, which didn’t go to plan so had to resort to our Plan B, which was also not playing ball. Alternator belt replaced, but the bolt did not want to come undone either. The fuel filter hadn’t been replaced in a long time and was blocked. Air filter was well overdue a change.

Ben had bought a Mike Satur 4-2-1 exhaust manifold, which we fitted. He originally had on the list a new induction system and a new fuel pump. Then finally a Kmaps map was installed for him and he’s good to go.

A long days work, but we got everything done, so thankful of the heat as it was a really cold and wet day. Thanks to Ben’s lovely Dad for all the brews! I didn’t get any pics of the car, which is a shame as it’s a good example, too busy talking.

We wish Ben fun on his travels through Scotland. He’s sure to have a great trip.

So after another nights stopover in Ingleton we set off for home first thing on Thursday morning. Again we had thought about staying over another night and for me to climb Ingleborough again, but severe weather warnings were forecast.

Julie came over from Grimsby to collect her TF 135 from the workshop today. What should have been a weekend off Jon will now find himself in the murky depths of the vans engine replacing the turbo. Fingers crossed it goes to plan ready for our trip west on Monday and Tuesday.

It was lovely to see Chris and Sam again on Monday who came to pick up their Steppy, having made the epic journey from Acharacle, they then spent a few days in Scarborough before heading back home again on Thursday. Good to see on FB they made it back safely and dodged the snow this time.

An end to an era sees lovely Steve Gibson letting go his fab Trophy that he’s owned for decades and used as his daily commuter for most of it. The car will be enjoying a new chapter in its life in France. He’s also retired from running the MG North Yorkshire group that’s he’s been a great source of help and support in, not to mention the countless runs and events he’s successfully organised and held over the years. He’s still going to be around of course, but has bought himself a very snazzy Z4 to have some fun in. Thanks to Steve for sending us a lovely message thanking us for our help over the years, much appreciated. We shall be keeping in touch and will definitely take up the offer of a brew and a catch-up, with him and George, when we’re passing through. 💛

Have a great weekend everyone, near and far, I think there may even be some better weather in store tomorrow, which will be very welcome won’t it. 🌞 – https://ift.tt/CuKEHNo

Monday morning at workshop and ready for the arrival of Nigel and Jo, in their 2003 MG TF 135 (in Typhoon – IAB), who had driven up from Burnham-on-Sea on Sunday.

Initially booked on for a rear subframe replacement, as it had been noted, when they took it in for the recent respray, that there were holes in it.

Once up on our lift to give it an inspection we noticed that it was only the gearbox support arm that was holed and not the subframe itself.

We replaced this with a galvanized one and then rust treated and painted up the subframe. Whilst in there, we carried out a clutch replacement and a full cambelt service. The clutch had certainly done it miles, so was the right time to replace it.

The 4-way coolant connector just about fell to pieces, so this was replaced with new. The brake lights weren’t coming on and was found to be a faulty switch, so this was also replaced. All done and then sent round for the MOT on Wednesday afternoon.

It’s a beautiful example and does now look like a new car!

Lovely to see Nigel and Jo again, when they made their way back up the country to collect this afternoon. We waved them off on their long journey back, only for them to turn around after half a mile, as we’d omitted to refit the speed sensor, so we waved them off again and hope they have a smooth run back home, despite the truly grotty weather.

We will see them again on Sunday at Stoneleigh as they will be manning the stall again at the MG & Triumph Spares day, it’s a good event and worth a visit if it isn’t already on your calendars.

Everything now all complete on Julie’s TF 135, following the MOT on Wednesday, which brought up a few advisories. Now ready for her to come over from Grimsby to collect on Monday. So essentially we had an unexpected day off today, which was nice.

Have a great weekend everyone near and far. Maybe see a few people for a long overdue catch-up on Sunday! – https://ift.tt/zt5P2Fg